MINN KOTA FORTREX Instructions D'installation page 14

MOUNTING THE FOOT PEDAL
5
k. Once in the correct position, tighten the Jam Nut
upwards against the Stabilizer Bracket. This will
prevent the Aluminum Rod from turning.
l. Install the Top Bumper if there are threads exposed
on the Aluminum Rod above the Stabilizer Bracket.
Mounting the Foot Pedal
We recommend securing the Foot Pedal to the boat deck to
prevent it from being damaged during transport and to make
motor operation more efficient. It is recommended to use the
Mounting Holes on the Foot Pedal for a secure mount. The Foot
Pedal has three Mounting Holes. One Mounting Hole is located
under the Heel End of the Foot Pedal. The other two are located
under the Toe End of the Foot Pedal. We recommend using a
1/8" or 3/16" diameter screw and only tighten enough to slightly
compress the Bumper Pads underneath the Foot Pedal.
14 | minnkotamotors.com
Heel End
Mounting
Hole
Top Bumper
Stabilizer
Bracket
Jam Nut
Aluminum Rod
Toe End
Mounting
Holes
Bumper Pad
©2018 Johnson Outdoors Marine Electronics, Inc.