Integral Action Time Tn - Burkert 8623 Instructions De Service

Setting the post-comma value of the amplification factor

7.3.9 Integral action time TN

For the integral action time TN, select a value between 0.1 and 199.99 sec.
Setting the pre-comma value of the integral action time TN
Setting the post-comma value of the integral action time TN
After setting the integral action time TN, the parameters are accepted
and the return to the standard mode takes place.
Increase of the post-comma value
Continue from 7.3.9
Increase of the pre-comma value
Proceed to set the post-comma
value
End of the programming mode
Change to standard
mode
8623 - 21