Siemens SITRANS TF2 Instructions De Service page 38

Technical description
I
K
RTD
A/D
EEP RO M
Figure 2 SITRANS TF2 function plan
1.4 Operation
All functions are selected according to the following Table 1, Page 39 with mode but-
ton M. When the M button is pressed, the current mode appears on the left below the
display, the function of which can be taken from Table 1, Page 39. Using the
buttons, the parameters, the current value or the physical unit are changed and dis-
played on the LCD.
↑
When the or
If the value is above or below 0 when the
(Decade) of the value will change. When the M button is pressed, the parameters you
have set are confirmed and you are taken to the next mode. The unit returns to 'Mea-
sured value' function if you go past Mode 12 with the M button or no input has been
made for two minutes. The values set are saved to memory.
38
Green LED Red LED
200.00
µC
3 keys
U
K
EMV
U
D/A
U I
A
↓
keys are pressed, the first position of the displayed value is changed.
↑
or
Operating instructions
LCD
°C
+
U , I
4 ... 20 mA
H A
-
↓
buttons are pressed, the next position
SITRANS TF2
A5E00263328-02
↑ ↓
and