Siemens SITRANS TF2 Instructions De Service page 33

Operating instructions
Use for the purpose intended
Please note the following:
WARNING
The unit may only be used for the application cases described in the catalogue and in
the operating manual and only in conjunction with third-party devices and components
recommended or approved by Siemens.
Proper transportation, storage, installation, operation and maintenance of the product
are vital for ensuring correct and safe operation.
Trademarks
SIMATIC®, SIPART®, SIREC®, SITRANS® are registered trademarks of Siemens
AG.
Third parties using for their own purposes any other names in this document which
refer to trademarks might infringe upon the rights of the trademark owners.
Important safety instructions
Notes on transport and storage
The SITRANS TF2 should be stored and transported in dry and clean conditions, and
if possible in the original packaging.
Permitted storage temperature: –40 °C ... +85 °C. (–40 °F... +185 °F)
Knocking and vibration should be avoided.
SITRANS TF2
A5E00263328-02
33