Publicité
Les langues disponibles
Les langues disponibles
TECHNICAL INFORMATION
FOR INSTALLING TECHNICIANS
7. USEFUL RECOMMENDATIONS
7.1. Qualification of installing technicians
WARNING
A qualified technician must perform the installation and first start up of the
appliance, in line with the relevant national regulations in effect, and any other
requirement set out by the local governments or public health institutions.
The heat pump hot water tank contains R134a cooling agent of the quantity
required for its operation. The cooling fluid does not damage the ozone layer of the
atmosphere, it is not flammable or explosive, but only authorized personnel is allowed
to perform any maintenance or repair work on the cooling circuit using adequate
equipment.
7.2. Use of the Installation, Operating and Maintenance Manual
WARNING
Improper installation may cause injuries to people or animals, or cause damages in
objects. The manufacturer assumes no liability for these.
The person performing installation of the appliance must observe the instructions
of the manual. After finishing the installation, the person performing it must provide
information and guidance to the user as to the operation of the water heater and the
proper execution of main operations.
7.3. Inspection of the heat pump water heater
When moving the appliance or opening its packaging, please, follow the instructions
laid down under Clauses 1.4, 1.5 and 1.6 of the chapter GENERAL INFORMATION
carefully.
During the removal of the packaging, please, check the integrity of the appliance and
that all necessary parts are located in the package.
83
Publicité
