Publicité
Les langues disponibles
Les langues disponibles
Symbol
Mode
Eco
Auto
On holiday
Boost
Time
Program
Information
Before switching on
After installation of the pipes for the sanitary hot water tank and the electrical
connections, fill the tank with water. Then, you can switch on the appliance.
When switched on, the LCD display shows all segments for a few seconds.
When powered on first, the appliance starts to operate in ECO mode, in line with
the default settings. This is indicated by the ECO symbol flashing on the display. The
flashing display indicates the first start-up. Flashing will stop automatically after 24
hours. If you press any button, the factory preset water temperature will appear on
the display, to which the appliance will heat up the sanitary water.
After first installation, and when the first long mode of the appliance has finished, it
is recommended to set the time. Select "TIME" mode using the
time.
When you start up the appliance, all indicators on the control unit will light up for 3
seconds, the buzzer will ring twice, and then the display will show up. If no setting
is entered for 1 minute, all indicators will turn off automatically, except for the Fill
Water indicator, which will flash, and the Outlet Temp indicator, which will illuminate
continuously.
The appliance operates using the heat pump only.
The appliance automatically switches between heat pump mode to electrical
heating support, subject to the ambient temperature in the air inlet of the heat
pump.
Defreezing. The days aligned to the frequency are indicated.
Frost protection function constantly active.
In boost mode, the heat pump and the electrical heating support operate
simultaneously, thereby heating up the water in the tank to the preset
temperature the quickest possible.
Setting the date and time is necessary for the programs to operate properly.
The display can show how the appliance changes automatically between
the heat pump mode and the electrical heating support, subject to the
temperature of air coming to the air inlet.
Accordingly, you can display the actual performance on the appliance while
running the program.
It can be used to display weekly and monthly statistics providing actual
feedback on the efficiency of the appliance and the usage behaviours.
5.3. Operation procedure
Description
button to set the
73
Publicité
