One for All Kameleon 10 URC-8210 Mode D'emploi page 30

Problem:
Your brand is not listed in the
code section?
The KAMELEON 10 does not
operate your device(s)?
The KAMELEON 10 is not
performing commands
properly?
Problems changing channels?
Video / PVR / DVD / CD / AUD
not recording?
The KAMELEON 10 does not
respond after pressing a key?
Your original remote had a
"20" key?
Upon each keypress, the IR
indicator will blinks 5 times.
You are not able to enter the
programming mode?
WWW.ONEFORALL.COM
Trouble-Shooting
Problem & Solution
Solution:
Try the search method on page 13.
A) Try all the codes listed for your brand.
B) Try the search method on page 13.
You may be using the wrong code. Try
repeating the Direct Set-Up using another
code listed under your brand or start the
search method over again to locate the
proper code.
Enter the program number exactly as you
would on your original remote.
As a safety feature on your KAMELEON 10,
you must press the Record key twice.
Make sure you are using new batteries and
are aiming the KAMELEON 10 at your
device.
You can find this function on the AV key.
Please make sure to place the KAMELEON
10 in the Recharging Station.
Please make sure to place the KAMELEON
10 in the Recharging Station.
29