One for All Kameleon 10 URC-8210 Mode D'emploi page 18

To delete a learned function:
To delete one single learned function, follow the steps below.
Example: to delete the mono/stereo function learned on the "A" key in TV1
mode:
1. Press and hold the MAGIC key until the rabbit comes out of the hat
(the screen will change to the setup screen).
2. Press IR DELETE.
3. Press the device key (example TV1) in which the function will be deleted.
4. Press the learned key which you want to restore (example "A") twice. The
IR Indicator will blink twice and the unit will return to the setup screen.
- The original function (if present) of the KAMELEON 10 will be restored.
- If there is another learned function you want to delete, repeat steps 2 – 4.
To delete a Shifted learned function:
To delete one single shifted learned function, follow the steps below.
Example: to delete the mono/stereo function learned shifted on the "red" key
in TV1 mode:
1. Press and hold the MAGIC key until the rabbit comes out of the hat
(the screen will change to the setup screen).
2. Press IR DELETE.
3. Press the device key (example TV1) in which the function will be deleted.
4. Press MAGIC then press twice the learned key which you want to restore
(example "red" key). The IR Indicator will blink twice and the unit will return to
the setup screen.
- The original function (if present) of the KAMELEON 10 will be restored.
- If there is another Shifted learned function you want to delete, repeat steps
2 – 4.
To delete all learned functions within a certain mode:
Example: to delete all learned functions within the TV1 mode:
1. Press and hold the MAGIC key until the rabbit comes out of the hat
(the screen will change to the setup screen).
2. Press IR DELETE.
3. Press the mode key in which you want to delete all functions twice. In our
example, press TV1 twice. The IR Indicator will blink twice and the remote
will return to the setup screen.
The Operational Reset will erase all learned functions across all modes and
some other programmed functions like Key Magic and Macros.
1. Press and hold the MAGIC key until the rabbit comes out of the hat
(the screen will change to the setup screen).
2. Press OTHER.
3. Press 9 8 0. The IR Indicator will blink four times and the remote will return
to the setup screen.
WWW.ONEFORALL.COM
Learning Feature
Operational Reset
17