One for All Kameleon 10 URC-8210 Mode D'emploi page 10

10.
11.
12.
13.
14.
15.
16.
17.
( )
18.
WWW.ONEFORALL.COM
The Keypad
INFO / EJECT / BACK
In SAT mode you can select the "info" function. If
available on your original remote you will obtain the
EJECT function (in VCR, AUX1, CD, DVD, AUD1, AUD2 and
AUX2 mode). In SAT menu mode you may use the "back"
key to go to the previous menu screen.
FAV / PRESET / SP/LP
In SAT mode you will obtain the FAV (favourite) function.
In AUD1, AUD2 mode, the PRESET key will change to the
PRESET/MENU screen allowing access to the PRESETS 1 - 9,
0 and +10 on the digits. In VCR and AUX1 mode you will
obtain the SP/LP (tape speed) function.
AUDIO / TUNE -
In DVD, AUX2, SAT, AUD1 and AUD2 mode you will
obtain the "Audio" function. In AUD1, AUD2 mode you
will obtain the "TUNE –" function in the preset/Menu
screen.
GUIDE / DSP
In SAT mode the "GUIDE" key will change the screen into
SAT-menu mode and give you the "Guide" function, if
available on your original remote. In DVD, AUX2 mode
you will obtain the "Guide" function, if available on your
original remote. In AUD1, AUD2 mode you will obtain the
"DSP" function.
SUBT. / TUNE +
In SAT, DVD, AUX2, AUD1 and AUD2 main mode you will
obtain the SUBTITLE function. In AUD1 and AUD2 mode
you will obtain the "TUNE +" function in the preset/Menu
screen.
MENU
Pressing this key will allow you to operate the Menu and
in TV1, TV2, VCR, AUX1, CD, AUD1, AUD2 and SAT mode
will also change the screen to the menu mode. The MENU
key operates the same function it did on your original
remote control.
EXIT
The EXIT key will operate the same as on your original
remote. To return to the main screen (TV1, TV2, VCR,
AUX1, SAT, CD, AUD1 and AUD2 mode) press the device
key or use the SCROLL key.
MUTE
The Mute key operates the same function it did on your
original remote control.
CH +/- (in shifted mode; brightness +/-)
These keys operate just as those on your original remote.
In shifted TV mode (accessed by pressing MAGIC shortly
and releasing it) these keys may provide you the
brightness +/- function.
9