One for All Kameleon 10 URC-8210 Mode D'emploi page 23

The KAMELEON 10 - Recall function allows you to program up to two
channels, each consisting of a maximum of 4 key presses per channel
entry. This allows you to swap back and forth between two channels
with the press of a single key.
1. Press and release the TV1 key.
2. Press the MAGIC and PP keys together until the rabbit comes out of
the hat. The animated IR Indicator will blink twice.
3. Enter the first channel number exactly as you would on your original
remote (e.g. <-/-->, <1>, <2> to get channel number 12).
4. Press PP once and release. The animated IR Indicator will blink once.
5. Enter the second channel number exactly as you would on your original
remote (e.g. <-/-->, <2>, <3> to get channel number 23).
6. Press the MAGIC key, the IR animation blinks twice.
If you press PP, you will obtain the second channel programmed (being
<23>) and if you press PP again you will obtain the first channel
programmed (being <12>).
- The KAMELEON 10 - Recall is mode dependant and can only be
programmed in TV1, TV2 or SAT mode.
- The KAMELEON 10 - Recall Feature is only programmable in one mode
at a time.
- To enter only one channel number, skip steps 4 and 5.
- If two channel numbers have been stored previously, entering one new
channel will delete the oldest entry.
- If no key is pressed while in KAMELEON 10 – Recall mode, the remote will
return to user mode after 30 seconds.
To reset the PP key:
1. Press and release the TV1 key.
2. Press the MAGIC and PP keys together until the rabbit comes out of
the hat. The animated IR Indicator will blink twice.
3. Press PP and release. The animated IR Indicator will blink once.
4. Press MAGIC and release. The animated IR Indicator will blink twice.
22
Extra Features
KAMELEON 10 - Recall
WWW.ONEFORALL.COM