Publicité
Les langues disponibles
Les langues disponibles
The following example shows:
•
Assigning group 1 to TV1. This means that in HOME THEATRE mode
the POWER key will work for your television.
•
Assigning group 2 to SAT. This means that in HOME THEATRE mode
the CH +/- keys will work for your satellite receiver.
•
Assigning group 3 to AUD1. This means that in HOME THEATRE mode
the MUTE and VOL +/- keys will work for your HiFi Set.
•
Assigning group 4 to DVD etc...
1.
Press any device key (e.g. TV1).
2.
Press and hold down the MAGIC key (for about 3 seconds) until
the rabbit comes out of the hat (the screen will change to the setup screen).
3.
Press the THEATRE key.
The POWER key will light up (Group 1).
4.
Press the device key (e.g. TV1) to which you want to assign group 1.
The TV1 key will light up shortly and the IR Animation blinks twice.
For example: pressing device key "TV1" will assign the POWER function
to TV1 mode. This is stored automatically. Whenever in Home Theatre
mode the POWER function will be controlled from TV1 mode.
The CH+/- keys will light up (Group 2).
5.
Press the device key (e.g. SAT) to which you want to assign group 2. The
SAT key will light up shortly and the IR Animation blinks twice.
For example: pressing device key "SAT" will assign the CHANNEL +/-
functions to SAT mode. This is stored automatically. Whenever in Home
Theatre mode the CH +/- keys will be controlled from SAT mode.
The MUTE and VOL+/- keys will light up (Group 3).
6.
Press the device key (e.g. AUD1) to which you want to assign group 3.
The AUD1 key will light up shortly and the IR Animation blinks twice.
For example: pressing device key "AUD1" (e.g. HiFi Set) will assign the
MUTE and VOL +/- functions to AUD1 mode. This is stored automatically.
Whenever in Home Theatre mode the MUTE and VOL +/- keys will be
controlled from AUD1 mode.
PLAY, STOP, REW, FF, SKIP BACK, SKIP FORWARD, REC and PAUSE will light
up (Group 4).
7.
Press the device key (e.g. DVD) to which you want to assign group 4,
etc............There are 18 different key groups to go through. Please refer to
the table on page 25.
-
Simply press "MAGIC" to skip a group. The next group will be displayed.
-
Press ESC once to return to the setup screen. Everything that has been
programmed up to that point in Home Theatre mode will be stored.
-
When no key is pressed for 30 seconds, the unit will exit programming state
and return to user mode.
26
Extra Features
WWW.ONEFORALL.COM
Publicité
