One for All Kameleon 10 URC-8210 Mode D'emploi page 21

This feature allows you to adjust the volume of a certain mode (e.g. TV mode)
while being in a different mode (e.g. VCR). If for example you're watching a
film on your Video, you can adjust the volume (a TV function) without
first pressing the TV1 (or TV2) key.
Example: To punch through to the volume of your amplifier programmed under
the AUD1 key, being in any other mode (e.g. VCR, SAT or DVD mode):
1. Press and hold down the MAGIC key until the rabbit comes out of the
hat (the screen will change to the setup screen).
2. Press VOLUME.
3. Then press the AUD1 key and the animated IR Indicator will blink twice
and the remote will return to the setup screen.
Result: being in any (e.g. DVD) mode, you will be able to control VOL+/- or
MUTE functions of your amplifier.
To cancel the "Volume Punch Through" per mode:
Example: to cancel the "Volume Punch Through" for the VCR mode:
1. Press and hold down the MAGIC key until the rabbit comes out of the
hat (the screen will change to the setup screen).
2. Press VOLUME.
3. Then press the VOL (-) key.
4. Press VCR once. The IR Indicator will blink four times and the unit will
return to the SETUP screen.
Result: being in VCR mode, you will be able to control VOL+/- or MUTE
functions of your VCR (provided it has volume control).
To cancel the "Volume Punch Through" for all modes:
1. Press and hold down the MAGIC key until the rabbit comes out of the
hat (the screen will change to the setup screen).
2. Press VOLUME.
3. Then press the VOL (+) key and the IR Indicator will blink four times and
the screen will return to the setup screen.
Result: in all modes the VOL+, VOL- and MUTE keys will now operate
the original functions again.
20
Extra Features
Volume Punch-Through
WWW.ONEFORALL.COM