One for All Kameleon 10 URC-8210 Mode D'emploi page 19

(How to set up two of the same devices on the KAMELEON 10)
It is possible to change the mode of any device key. This is useful if you want to
set up two (or more) of the same devices on the KAMELEON 10. The modified
device key will display the applicable keys for the revised mode. The code can be
set up using the "Direct set up" (p. 12) or "Search method" (p. 13). To change a
device key, see the two examples below.
Example 1; if you like to program a 3rd television on the AUX1 key.
Example 2; if you like to program a 2nd satellite receiver on the VCR key.
Example 1:
To program a 3rd Television on the AUX1 key (for example), you need to
change the AUX1 key into a TV key, so press:
(*) (*)
The AUX1 key has now become a 3rd TV key and will
display the applicable keys for this mode.
Now enter the Set-Up code for your 3rd Television by pressing:
(*) (*)
Example 2:
To program a second Satellite Receiver on the VCR key (for example), you
need to change the VCR key into a SAT key, so press:
(*)
The VCR key has now become a second SAT key and will display the
applicable keys for this mode.
Now enter the Set-Up code for your second Satellite Receiver by pressing:
(*)
- If you program a different device type on another key (e.g. 3rd TV on the
DVD key) the original device key icon will remain, but the displayed
function keys will change to suit the new device mode. For example;
if a 3rd TV is programmed on the DVD key, TV-text functions will be
displayed in DVD mode.
Resetting a Device key
Example: To reset the VCR key to its original mode, press:
(*)
(*) Hold down the MAGIC key until the rabbit comes out of the hat
(the screen will change to the setup screen).
(**) The animated IR Indicator will blink twice (the screen will
change to the setup screen).
(***) If your device is responding, press OK to save the code.
18
Extra Features
Mode re-assignment
(**) (**)
(TV Code) (**)
_ _ _ _ _ _ _ _
(**)
(SAT Code) (**)
_ _ _ _
(**)
WWW.ONEFORALL.COM
(***)
(***)