One for All Kameleon 10 URC-8210 Mode D'emploi page 22

If your device has a "Sleeptimer" function built in, you can access this function
with your KAMELEON 10 remote. To do so:
1. Make sure your device is switched on.
2. Press the device key TV1 (or TV2, SAT, CD, AUD1, AUD2).
3. Point the KAMELEON 10 at your device and press and release the MAGIC
key then press POWER. You should see the Sleeptimer activate on your
device. To increase the timer, simply press POWER again (within 10 seconds)
until the timer gets to the desired time.
- To deactivate the "Sleeptimer", repeat steps 1 – 3 above. During step 3,
continue pressing POWER again (within 10 seconds) until the timer indicates
zero minutes.
- Depending on how you used sleeptimer on the original remote, you might
need to access sleeptimer in a different way (through menu for example).
The KAMELEON 10 – Timer function allows you to activate a <desired func-
tion> from a specific <device mode> within a <specific amount of minutes>
(max. amount of timer is 60 minutes).
- The <desired function> can be an existing function within a specific mode,
a Macro, a Key Magic function or a Learned function.
Example: you want your TV to switch off after 45 minutes.
1. Press and hold the MAGIC key until the rabbit comes out of the hat
(the screen will change to the setup screen).
2. Press OTHER.
3. Press 9 8 5 to enter the KAMELEON 10 –Timer programming mode.
The animated IR Indicator will blink twice.
4. Press TV1 to select the mode where the KAMELEON 10 – Timer function will
come from. The animated IR Indicator will blink twice.
5. Press the POWER key to select the desired function. The animated IR
Indicator will blink twice.
6. Now press 4 5 to enter the amount of minutes after which the <Desired
function> needs to be activated (e.g. for 5 min. press 05, max. up to 60).
7. Press and hold OK for a duration of 3 seconds to activate the KAMELEON 10
– Timer function.
- Invalid key presses during the programming of KAMELEON 10 - Timer will
be ignored.
- The <Desired function> can be any key except for Device keys, SCROLL and
MAGIC.
- While the KAMELEON 10 – Timer is running, the IR animation will light
every 15 seconds.
- The KAMELEON 10 –Timer function is cancelled by setting up a new
KAMELEON 10 – Timer function.
- If no key is pressed while setting up a KAMELEON 10 – Timer function,
the remote will return to user mode after 30 seconds.
- The SCROLL key can be accessed any time during programming if applicable
in the current device mode.
WWW.ONEFORALL.COM
Extra Features
Device Sleeptimer
KAMELEON 10 - Timer
21