One for All Kameleon 10 URC-8210 Mode D'emploi page 11

19.
20.
21.
( )
22.
23.
24.
25.
26.
10
The Keypad
CENTRE / REAR
In AUD1, AUD2 mode these keys will (if available on your
original remote) allow you to adjust the CENTRE and REAR
levels of your speaker(s).
SURROUND / OK
If available on your original remote this key will allow you
to access the surround mode of your device. In menu
mode this key will confirm your choice. On some
devices you can confirm your menu option simply by press-
ing MENU.
Directional keys
If available on your original remote control, these keys will
allow you to navigate through the menu. On some TV's
you may have to press CH+/- and VOL+/- keys OR the color
keys (red, green, yellow, blue) to navigate through the
menu, depending on your model of TV.
VOL +/- (in shifted mode; colour +/-)
The volume keys operate just as those on your original
remote. In shifted TV mode (accessed by pressing MAGIC
shortly and releasing it) these keys may provide you the
colour +/- function.
Number keys / INPUT (in prog. Mode; setup features)
The number (1 – 9, 0) keys provide functions just like your
original remote. In AUD mode, the number (1 – 9, 0, +10)
keys may provide (if available on your original remote) an
INPUT function (TUNER, CD etc.). If your original remote
features a "function select" or "input select" function you
may find this under the SEL key. When in programming
mode the digit keys will display the various setup
features.
-/-- / +10
If your original remote uses one/two digit input switching
(-/-- symbol), this function can be obtained by pressing
the -/-- key. In DVD, AUX2, CD, AUD1 or AUD2 mode you
will obtain the +10 function.
AV / SEL (input select)
The AV key operates the same function it did on your
original remote control. If your original remote uses a 20
key, this function can be found by pressing the AV key. If
your original audio remote comes with a "function select"
or "input select" function, you can obtain this pressing the
SELECT key.
ESC
This key only appears in programming mode and is used to
return to the Setup screen or to exit programming mode.
WWW.ONEFORALL.COM