Hauff-Technik GFH 30 Instructions D'installation page 30

GFH 30
Insert the SpeedNet tubes or telecommunication lines
16
through the openings on the outside of the building
until they are in their fi nal position (see fi g.: 23).
NOTE!
Failure to seal due to incorrect installation!
Improper installation can result in damage.
• The minimum bending radiuses of the glass fi bre
cables and SpeedNet tubes must be observed!
Optional:
Attach wall holder above the GFH 30 (see fi g.: 24) and
snap in corrugated pipe.
The minimum bending radius of the SpeedNet tubes or
telecommunication lines must be observed.
Service telephone +49 7322 1333-0
30
Art. Nr.: 5090033079 Rev.: 01/2018-09-04
EN
Fig.: 23
Fig.: 24
Subject to change�