GFH 30
NOTE!
Failure to seal due to incorrect installation!
Improper installation can result in damage.
• All surfaces must be clean, fi rm and free of dust
and grease.
Air extraction hose must be inserted in the plastic fl ange
2
prior to installation (see fi g.: 3).
Legend for fi g.: 3
1
Air extraction hose
The air extraction hose is included in the mixer jet
package.
Optional:
3
Push in corrugated pipe onto the punching pin up to
the tensioning ring by applying rotational movements
(see fi g.: 4).
Legend for fi g.: 4
1
Tensioning ring
12 Install glass fi bre building entry GFH 30
Partially insert glass fi bre building entry GFH 30 from the
1
outside of the building into the core drill hole and re-
move the protective foil from the butyl tape on the plastic
fl ange (see fi g.: 5).
Art. Nr.: 5090033079
Rev.: 01/2018-09-04
1
1
EN
Fig.: 3
Fig.: 4
Fig.: 5
25