Incompatible Vehicle Seat Belts; Vehicle Seating Positions - Britax Pavilion 65-G3 Guide D'utilisation

Vehicle Compatibility
6. Locking Latch Plate
Has a latch plate that
a
prevents the webbing from
becoming loose.
Tightens by pulling on the
b
belt webbing.

Incompatible Vehicle Seat Belts

WARNING!
The following types of vehicle seat belts are NOT
compatible with this child seat. If any of the belt types listed below are
in the chosen seating position, choose another vehicle seating position
or check your vehicle owner's manual for information on installing a car
seat in your vehicle.
1 2
Lap-shoulder belts Motorized,
with top or bottom automatic vehicle
anchor points on seat belts.
the vehicle door.
4 5
Inflatable lap- Lap belts forward
shoulder belts. of the vehicle seat
bight.
8
Latch
plate
Adjuster
3
Lap-shoulder
belts that have a
separate retractor
each for the
lap section and
shoulder section.
6
Lap belts with a
sewn-in latch plate
that have a retractor
that locks only in case
of a sudden stop.

Vehicle Seating Positions

WARNING!
DO NOT place child seat rear-facing in the
front seat of a vehicle with a passenger
air bag unless deactivated. DEATH or
SERIOUS INJURY can occur. See your
vehicle owner's manual for child seat
installation instructions. The back seat is
the safest place for children 12 and under.
Some vehicles have no seating positions
which are compatible with this child seat. If in doubt, contact the
vehicle manufacturer for assistance.
Forward-facing vehicle seats MUST be used with this child
seat. Side-facing or rear-facing seats CANNOT be used. See
the diagram below.
Vehicle Compatibility
9