Incompatible Vehicle Seat Belts; Vehicle Seating Positions - Britax PIONEER Guide D'utilisation

Vehicle Compatibility
Lap Belt
6.
Locking Latch Plate
Has a latch plate that
a
does not allow the belt to
become loose after it is
buckled.
Tightens by pulling on the
b
belt webbing.

Incompatible Vehicle Seat Belts

WARNING! The following types of vehicle seat belts
are NOT compatible with this child seat. If any of the belt types
listed below are in the chosen seating position, choose another
vehicle seating position or check your vehicle owner's manual
for information on installing a car seat in your vehicle.
Lap belts with a sewn-in
latch plate that have a
retractor that locks only in
case of a sudden stop.
Lap-shoulder belts with top
or bottom anchor points on
the vehicle door.
38
Latch
Plate
Adjuster
Lap belts forward of
the vehicle seat bight.
Motorized, automatic
vehicle seat belts.
Vehicle Buckle Positions
The position of the vehicle
WARNING!
belt buckle can adversely affect the stability
of the child seat.
If the buckle lies near the incorrect position
( ) when the vehicle belt is tightened, try fitting
the child seat in another seating position in the
vehicle. If it is not possible to achieve the correct
position ( ) for the buckle, then another seating
position MUST be used.

Vehicle Seating Positions

WARNING! Owners of vehicles with front passenger side
airbags should refer to their owner's manual for child restraint
installation instructions. The back seat is the safest place for
children 12 and under.
Some vehicles have no seating positions which are compatible
with this child seat. If in doubt, contact the vehicle manufacturer
for assistance.
Forward-facing vehicle seats MUST be used with this child
seat. Side-facing or rear-facing seats CANNOT be used. See
the diagram below.
Vehicle Compatibility
39