BFT U-BASE 2 PC Mode D'emploi page 74

17-04-2015 D812032_01
10 – DEVICE MANAGEMENT: CONTROL UNITS
Once you have double-clicked the icon
of the Connected Control Unit, you
can edit the Parameters, Logic and
Scheduled maintenance date and add
a system description in addition to
viewing diagnostics and alarms,
printing the system configuration and copying the control unit/receiver onto another compatible one.
You need to save each change made using the "Save" key, otherwise it will be lost.
To write or reread the control unit,
press the "Write" and "Read" buttons
respectively; these buttons will only
appear when a control unit is
Connected.
Manual U-Base 2 PC ver. 01 Page 74
www.BFTGateOpeners.com