BFT U-BASE 2 PC Mode D'emploi page 82

17-04-2015 D812032_01
12.3 – U-Prog: Operations
Pressing the icon in the top right corner calls up the operations menu.
"Find": Used to search for a transmitter in the database, indicating what system it is found in. You can click
on the result to enter the receiver.
"Read Transmitter": Used to read the transmitter's Serial Number, key transmitted and frequency.
"Clone with Code": Used to clone a transmitter, based on the Receiver Code and community code.
Programming can be done via cable (with UniFlat and UniMitto) or with a Replay.
"Clone with Master": used to clone a transmitter, based on the receiver's Master transmitter.
Programming can be done via cable (with UniFlat and UniMitto) or with a Replay.
"Fixed code Clone": used to clone a fixed-code transmitter, based on a transmitter stored in the receiver's
memory. Programming can be done via cable (with UniFlat and UniMitto) or with a Replay.
Follow the on-screen instructions to perform the various operations.
Manual U-Base 2 PC ver. 01 Page 82
www.BFTGateOpeners.com