BFT U-BASE 2 PC Mode D'emploi page 78

17-04-2015 D812032_01
11 – DEVICE MANAGEMENT: RECEIVERS
Once you have double-clicked the icon of
the Connected receiver, you can add
new transmitters in Blocks using the
Label code; edit, delete or disable the
transmitters listed; edit the Receiver
and community code; edit the clone
default settings; print the receiver
configuration with the transmitters; and
copy the control unit/receiver onto
another compatible one.
You need to save each change made using the "Save" key, otherwise it will be lost.
To write or reread the control
unit/receiver, press the "Write" and
"Read" buttons respectively; these
buttons will only appear when a control
unit is Connected.
For EElink receivers, the buttons will only
appear if a U-prog is connected.
Manual U-Base 2 PC ver. 01 Page 78
www.BFTGateOpeners.com