BFT U-BASE 2 PC Mode D'emploi page 67

17-04-2015 D812032_01
Connector:
"Connection": it is possible to enable or
disable the search for U-link systems
using Bluetooth (Uniblue) and/or the
RS485 (Uniser) and/or the TCP/IP
GATEWAY networks
The display shows the settings required
to enable the system search using the
TCP/IP GATEWAY network.
They depend on how the BEBATCP
GATEWAY is configured.
"IP": IP address of the TCP/IP GATEWAY
card or
host if the DynDns service has been set
or
name (NetBios) associated to the
TCP/IP GATEWAY by default; the
module is called bebatcp
"Gate": present in the setting of the
TCP/IP GATEWAY module, by default
1111
"Pws Tcp/IP": password of the TCP/IP
GATEWAY module. It allows to access
the TCP/IP GATEWAY module safely; by
default it is BFT12345
Manual U-Base 2 PC ver. 01 Page 67
www.BFTGateOpeners.com