BFT U-BASE 2 PC Mode D'emploi page 59

17-04-2015
6 - PAIRING PROCEDURE
Power up the BFT Control Unit/Receiver housing the B EBA BLUE GATEWAY (Uni-blue) module you want to
communicate with.
Referring to the instructions for the BFT Control Unit/Receiver in use, set a sufficiently complex password.
Turn off the BFT Control Unit/Receiver and wait about 10s.
Turn the BFT Control Unit/Receiver back on and wait a few seconds before starting the procedure.
NOTE: The pairing procedure must be carried out before you can communicate with U-prog via
Bluetooth. The pairing procedure password for
6.1 - Pairing procedure on Windows XP with Belkin dongle
1. Double-click the My Bluetooth Places icon on the desktop
or the Bluetooth icon on the taskbar.
2. Press "Add a Bluetooth Device".
3. Press "Next" to continue.
Manual U-Base 2 PC ver. 01
U-PROG
www.BFTGateOpeners.com
D812032_01
0000
is
Page 59