BFT U-BASE 2 PC Mode D'emploi page 58

17-04-2015
5. The InstallShield Wizard will start installing the Belkin
Bluetooth software. This may take up to five minutes;
please wait.
6. During the installation process, you may be asked to insert
the USB adapter. If the USB adapter is not yet plugged into
the computer, you can now insert it in the port.
Also wait for the windows update to download.
7. Confirm completion of the software installation, restarting
the computer by clicking "Reboot", or exit installation by
pressing "Finish".
8. Make sure the hardware has installed
correctly: the devices in "Device Manager"
should include "Broadcom 2046 Bluetooth
2.1 usb UHE Dongle".
9. The device is ready for use.
Manual U-Base 2 PC ver. 01
www.BFTGateOpeners.com
D812032_01
Page 58