Publicité
1: VEHICLE HARNESS
3: Disconnect
the negative
cable first.
2: BATTERY
AC1765
1: COVER No.1
AC6924
00500171
1. INSTALLATION INSIDE
ENGINE COMPARTMENT
CAUTION
1. Before starting installation, remove the negative
cable from the battery.
2. Before making any hoses and tubes
connections, apply a few drops of compressor
oil to the seat of O-ring and coupling nuts.
3. When tightening and loosening the fittings, use
two wrenches for support.
4. Ensure fender covers are in position.
5. Start the work from the inside passenger
compartment side.
CAUTION
First remove the negative terminal on the battery
and the vehicle harness connection before installing
the equipment.
(1)
REMOVAL OF ORIGINAL PARTS-1
(a) Cover No.1
- 1 -
Publicité
