Publicité
3: BOX-END COMBINATION
WRENCH (19mm)
6: P/S PUMP
PULLEY
5: TENSIONER
PULLEY
4: CRANKSHAFT PULLEY
1: VEHICLE HARNESS(3-P)
1: COMPRESSOR DRIVE BELT
4: FRONT
2: NOTE
1: ALTERNATOR
PULLEY
2: WATER PUMP
PULLEY
3: COMPRESSOR
PULLEY
AC4486
2: FRONT
(d) Use the following procedure to install the
compressor drive belt.
NOTE
Set the box-end combination wrench (19mm) as
shown in the left figure, and install the compressor
drive belt to the pulleys while pulling the box-end
combination wrench to the front of the vehicle.
AC6952
(e) Install the compressor drive belt to the pulleys as
shown in the left figure.
(f)
Pull the vehicle harness (3-P) down.
AC6950
- 21 -
00500171
Publicité
