Publicité
3: FRONT
1: VEHICLE HARNESS(3-P)
2: COMPRESSOR
2: RUBBER CUSHIONS
1: CONDENSER
1: MOTOR
2: SCREWS
3: FAN SHROUD
1: CONDENSER FAN
2: NUT(M6)
AC6957
(g) Connect the vehicle harness (3-P) to the
compressor.
AC6951
(4)
CONDENSER & CONDENSER FAN
ONLY WHEN CONDENSER AND RUBBER
BUSH ARE SEPARATE [(a)]
(a) Assemble two rubber cushions to the condenser.
AC6955
(b) Assemble the condenser fan motor to the fan
shroud using three screws.
Tightening Torque
2.6 N•m (25 kgf•cm, 1.9 lbf•ft)
CAUTION
The screws must be facing in the direction of
installation.
AC6956
(c) Assemble the condenser fan to the condenser
fan motor using a nut.
Tightening Torque
6.2 N•m (63 kgf•cm, 4.5 lbf•ft)
CAUTION
The installation points of the condenser fan motor
must be correctly inserted into the installation holes
of the condenser fan.
- 23 -
00500171
Publicité
