Publicité
2: CONDENSER
8
3: BOLT
1: LIQUID TUBE No.1
W/WASHER
(M6
25)
1: PLASTIC CLAMP No.1
3: FRONT
3: LIQUID & SUCTION TUBE
2: PLASTIC CLAMP No.1
1: LIQUID TUBE No.2
4: FRONT
AC6965
3: FRONT
4: FRONT
AC6964
2: CAUTION
AC6969
1: LIQUID TUBE No.2
4: HAND TIGHTEN
2: LIQUID TUBE No.1
AC6966
- 29 -
00500171
(5)
PIPING
(a) Connect the liquid tube No.1 to the condenser
using a bolt.
Tightening Torque
5.4 N•m (55 kgf•cm, 4.0 lbf•ft)
(b) Install the plastic clamp No.1 to the body.
CAUTION
If the throttle link cable comes off, then return to the
original position by aligning with the white marking
and securing the vehicle clamp.
(c) Connect the liquid tube No.2 to the liquid &
suction tube.
(d) Fasten the liquid tube No.2 to the plastic clamp
No.1.
(e) Loosely connect the liquid tube No.2 to the liquid
tube No.1.
Publicité
