Publicité
1: FAN SHROUD
2: CONDENSER FAN HARNESS
3: VEHICLE CLAMP
1: FAN SHROUD
4: FRONT
1: VEHICLE
HARNESS
(2-P,BLACK)
2: VEHICLE HARNESS CLIP
4: CLAMPS
1: CARDBOARD
2: CONDENSER
3: CAUTION
2: CAUTION
AC6960
3: VEHICLE HARNESS
(d) Fasten the condenser fan harness to the five
clamps of the fan shroud.
(e) Fasten the condenser fan harness to the vehicle
clamp.
AC6958
(f)
Insert the condenser assy in front of the radiator.
NOTE
Insert a piece of cardboard along the front of the
radiator to avoid scratching the radiator fins.
CAUTION
Make sure that the rubber cushions positively
inserted into the vehicle holes.
AC6959
(g) Reinstall the fan shroud.
CAUTION
1. Insert the left and right grooves of the fan
shroud into the vehicle as shown in the left
figure.
2. The figure shown is for the right side. Perform
the same work for the left side.
(h) Reconnect the vehicle harness to the radiator
fan motor.
(i)
Connect the vehicle harness (2-P, black) to the
condenser fan motor harness.
(j)
Reinstall the vehicle harness clip to the fan
shroud.
AC6961
- 25 -
00500171
Publicité
