Publicité
1: ALTERNATOR BELT
2: NOTE
3: BOX-END COMBINATION
WRENCH (19mm)
1: COMPRESSOR
[1]
[2]
[3]
2: BOLTS(M8
(DISCARD)
4: FRONT
AC6947
3: FRONT
76)
AC6949
- 19 -
00500171
(3)
COMPRESSOR AND COMPRESSOR DRIVE
BELT
(a) Use the following procedure to remove the
alternator belt.
NOTE
Set the box-end combination wrench (19mm) as
shown in the left figure, and remove the alternator
belt from the pulleys while pulling the box-end
combination wrench to the front of the vehicle.
(b) Remove and discard the alternator belt.
(c) Install the compressor to the engine block using
three bolts.
Tightening Torque
24.5 N•m (250 kgf•cm, 18.1 lbf•ft)
CAUTION
Tightening order ; [1] » [2] » [3]
Publicité
