Firmware Update; Software Required; Update Procedure; Restricting Access - Keysight Technologies RP7900 Serie Guide D'utilisation Et De Maintenance

Firmware Update

Refer to Instrument Identification
on your instrument. To obtain the latest firmware for the RP793xA and RP794xA
series, go to www.keysight.com/find/RPSfirmware. To obtain the latest firmware
for the RP795xA and RP796xA series, go to www.keysight.com/find/RPS2firmware.

Software Required

To update the firmware you need to download the following two items onto your computer from the
RPS product page at the RPS firmware link referenced above.
The Universal Firmware Update Utility
l
The latest firmware version
l

Update Procedure

Once you have copied both items to your computer, proceed as follows:
1. Run the Universal Firmware Update Utility
2. Browse to the location of the firmware that you just downloaded. Press Next.
3. Select the interface that you are using to communicate with your instrument and enter the
address or connections string. Press Next.
4. Verify that the information is correct for the instrument you are updating. Press Begin Update.
The update utility will now update the firmware and restart your instrument.

Restricting Access

Note that you can restrict access to the instrument by the firmware update utility. This prevents
unauthorized users from updating the firmware.
Front Panel Menu Reference
Select System\Admin\Update
Check the Must log in as admin box.
This requires a user to log into the Admin menu
before the firmware update utility performs a
firmware update.
Keysight RP7900 Series Operating and Service Guide
to determine which firmware version is installed
SCPI Command
Not available
7 Service and Maintenance
303