Keysight Technologies RP7900 Serie Guide D'utilisation Et De Maintenance page 30

1 Quick Reference
:TERMinate
:LAST 0|OFF|1|ON
:TOUTput
:BOSTep
[:DATA] <Bool>{,<Bool>}
:POINts?
:EOSTep
[:DATA] <Bool>{,<Bool>}
:POINts?
:VOLTage
[:LEVel] <value>{,<value>}
:POINts?
[SOURce:]
POWer
:LIMit? Returns the output power limit of the instrument
[SOURce:]
STEP
:TOUTput0|OFF|1|ON
[SOURce:]
VOLTage
[:LEVel]
[:IMMediate]
[:AMPLitude] <value>
:TRIGgered
[:AMPLitude] <value>
:BWIDth LOW|HIGH1
:RANGe 0 | 1 | 2
:LEVel 0 | 1 | 2, <value>
:LIMit
[:POSitive]
[:IMMediate]
[:AMPLitude] <value>
:LOW <value>
:MODE FIXed|STEP|LIST|ARB
:PROTection
[:LEVel] <value>
:LOW
[:LEVel] <value>
:DELay <value>
:STATe 0|OFF|1|ON
:RESistance
[:LEVel]
30
Determines the output value when the list terminates.
Generates a trigger out at the Beginning Of STep
Returns the number of list points.
Generates a trigger out at the End Of STep
Returns the number of list points.
Specifies the setting for each list step.
Returns the number of list points.
Specifies whether a trigger out is generated when a transient step occurs.
Sets the output voltage when in voltage priority mode.
Sets the triggered output voltage.
Sets the voltage compensation (RP795xA, RP796xA)
Sets the voltage compensation. (RP793xA, RP794xA)
Sets the compensation frequency. (RP793xA, RP794xA)
Sets the voltage limit when in current priority mode.
Sets the low-voltage limit. (RP793xA, RP794xA)
Sets the transient mode.
Sets the over-voltage protection level.
Sets the low-voltage protection level. (RP793xA, RP794xA)
Sets the low-voltage protection delay. (RP793xA, RP794xA)
Enables or disables low-voltage protection. (RP793xA, RP794xA)
Keysight RP7900 Series Operating and Service Guide