Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
mDNS Service Name
The mDNS service name is registered with the selected naming service. To configure the mDNS
service name of the instrument:
Front Panel Menu Reference
Select System\IO\LAN\Modify\mDNS
You can enter any value from the numeric keypad. For additional
characters, use the up/down navigation keys to enter an alpha
character by scrolling through the selection list that appears when
you press the keys. Use the left/right navigation keys to traverse
the text field. Use the backspace key to delete a value. Press Enter
when you are finished.
mDNS Service Name - This field registers the service name with the selected naming service. If
l
the field is left blank, no name is registered. A service name may contain upper and lower case let-
ters, numbers and dashes(-).
Each instrument is shipped with a default service name with the format: Keysight-modelnumber-
l
description-serialnumber, where modelnumber is the unit's 7-character model number (e.g.
RP7951A), description is the description, and serialnumber is the 10-character serial number loc-
ated on the label on the top of the unit (e.g. MY12345678).
Services
This selects the LAN services to enable or disable.
Front Panel Menu Reference
Select System\IO\LAN\Modify\Services
Check or uncheck the services that you wish to enable or disable.
The configurable services include: VXI-11, Telnet, Web control, Sockets, mDNS, and HiSLIP.
l
You must enable Web control if you wish to remotely control your instrument using its built-in Web
l
interface.
Keysight RP7900 Series Operating and Service Guide
SCPI Command
Not available
SCPI Command
Not available
3 Getting Started
107
Publicité
Chapitres
Table des Matières
