Keysight Technologies RP7900 Serie Guide D'utilisation Et De Maintenance page 32

1 Quick Reference
:SECurity
:IMMediate
:SET <block data>
:TIME <hh>, <mm>, <ss>
:VERSion?
TRIGger
:ACQuire
[:IMMediate]
:CURRent
[:LEVel] <value>
:SLOPe POSitive|NEGative Sets the slope of the signal.
:INDices
[:DATA]?
:COUNt?
:SOURce <source>
:TOUTput
[:ENABle] 0|OFF|1|ON
:VOLTage
[:LEVel] <value>
:SLOPe POSitive|NEGative Sets the slope of the signal.
:ARB
:SOURce <source>
:ELOG
[:IMMediate]
:SOURce <source>
:TRANsient
[:IMMediate]
:SOURce <source>
32
Clears all user memory and reboots the instrument.
Get and set the instrument state
Sets the time of the system clock.
Returns the SCPI version that the instrument complies with.
Generates an immediate trigger.
Sets the triggered level of the output.
Returns the indices where triggers were captured.
Returns the number of triggers captured during the acquisition.
Selects the trigger source for the acquisition system: BUS |CURRent1 |EXTernal |PIN<1-7>
|TRANsient1 |VOLTage1
Enables measurement triggers to be sent to a digital port pin.
Sets the triggered level of the output.
Selects the trigger source for arbitrary waveforms: BUS |EXTernal |IMMediate |PIN<1-7>
Generates an immediate trigger.
Selects the trigger source for external data logging: BUS |EXTernal |IMMediate |PIN<1-7>
Generates an immediate trigger.
Selects the trigger source for the transient system: BUS |EXTernal |IMMediate |PIN<1-7>
Keysight RP7900 Series Operating and Service Guide