Command Quick Reference - Keysight Technologies RP7900 Serie Guide D'utilisation Et De Maintenance

1 Quick Reference

Command Quick Reference

Some [optional] commands have been included for clarity. All settings commands have a
corresponding query. See the
ABORt
:ACQuire Cancels any triggered measurements.
:ELOG Stops external data logging.
:TRANsient Cancels any triggered actions.
CALibrate
:COUNt?
:CURRent
[:LEVel] <value>
:SHARing
:TC
:DATA <value>
:DATE <"date">
:LEVel P1|P2|P3
:PASSword <value>
:RESistance
:BOUT
:SAVE
:STATe 0|OFF|1|ON
:VOLTage
[:LEVel] <value>
DISPlay
[:WINDow]
[:STATe] 0|OFF|1|ON
:VIEW METER_VI|METER_VP|METER_VIP
:SAVer
[:STATe] 0|OFF|1|ON
FETCh
[:SCALar]
:CURRent
[:DC]? [<start_index>, <points>]
:ACDC?
:HIGH?
:LOW?
:MAXimum?
:MINimum?
:POWer
[:DC]?
24
Syntax Conventions for SCPI.
Returns the number of times the unit has been calibrated.
Calibrates the current programming and measurement.
Calibrates the Imon signal for paralleled units. (RP795xA, N676xA)
Calibrates the temperature coefficient. (RP793xA, RP794xA)
Enters the calibration value read by the external meter.
Enters the calibration date in nonvolatile memory.
Advances to the next level in the calibration.
Sets a numeric password to prevent unauthorized calibration.
Calibrates the bottom out resistance. RP795xA, RP796xA)
Saves the calibration constants in non-volatile memory.
Enables or disables calibration mode.
Calibrates the local voltage programming and measurement.
Turns the front panel display on or off.
Selects the parameters to display on the front panel.
Turns the front panel screen saver on or off.
Returns the averaged measurement.
Returns the RMS measurement (AC + DC).
Returns the High level of a pulse waveform.
Returns the Low level of a pulse waveform.
Returns the maximum or minimum value.
Returns the averaged measurement.
Keysight RP7900 Series Operating and Service Guide