Switching The Mobile On And Off; Start-Up Guide - Konrow Chipo3 Guide D'utilisation

discharge may cause malfunction or loss of data. If the
device is not working properly, restart the mobile or unplug
the mains adaptor from the power outlet then plug it in
again.

Start-up guide

5. Locking/Unlocking SIM cards
Your Chipo3 is a dual SIM mobile. It enables you to phone using
two lines from the same device. There are two SIM card slots.
• When you start up your phone, the latter invites you to

4. Switching the mobile on and off

To switch the mobile on, press
the On/Off button located
on the side of the mobile for
3 seconds.
If the mobile is switched on,
press for less than a second
on the button to put the device
into standby mode. Press it
again to leave standby mode.
To switch off the mobile,
press the On/Off button for 3
seconds until a menu appears,
then touch the Off button and
confirm.
enter the PIN codes of your two SIM cards in succession
(SIM1 then SIM 2).
• The ''emergency call'' function enables you to call an
emergency number without entering the PIN code.
EN