Konrow Chipo3 Guide D'utilisation page 23

Set up
1. Inserting a SIM card
Chipo3 is a mobile phone with dual
SIM card which enables you to use
two lines on the same mobile. Your
Chipo3 has two standard SIM ports.
To insert the SIM card(s):
• Switch off the phone and
remove the rear cover and
battery.
• Insert the SIM card correctly
into the relevant card slots (see
figure below).
• Then replace the battery and
cover.
2. Inserting a MicroSD
It is possible to increase the internal
memory of the Chipo3 device with
a MicroSD card (maximum 32GB
MicroSD card).
• Switch off the phone and remove
the rear cover and battery.
• Insert the memory card into the
relevant slot.
• Then replace the battery and
cover.
CAUTION: Inserting or removing a
SIM card or a MicroSD card requires
the mobile to be completely switched
off.
EN