Spare Parts - salmson LRE Installation Et Mise En Service

12

Spare parts

Spare parts table
Installation and operating instructions LRE, JRE
Spare parts may be ordered via a local specialist and/or Salmson cus-
tomer service.
Please provide all the information on the rating plate when ordering
spare parts. This helps prevent return queries and incorrect orders.
CAUTION! Risk of property damage!
Trouble-free pump operation can only be guaranteed when origi-
nal spare parts are used.
• Only use original Salmson spare parts.
• Each component is identified in the table below.
• Information to be provided when ordering spare parts:
• Spare part number
• Name/description of the spare part
• All data on the pump and drive rating plates
NOTE:
For a list of original spare parts, see the Salmson spare parts documen-
tation (www.salmson.com). The item numbers on the exploded view
drawing (Fig. 6) are intended as orientation and to provide a list of the
pump components (see list "Tab. 11: Spare part components" on
page 111). These item numbers are not to be used to order spare parts.
For the allocation of assemblies, see Fig. 6.
No. Part
1.1 Impeller (set)
1.11
1.12
1.13
1.2 Mechanical seal (set)
1.12
1.13
1.21
1.22
1.3 Motor
1.4 Motor/pump housing fasten-
ing screws
3 Pump housing (set)
1.13
3.1
3.2
3.3
6 Differential pressure sensor
(set)
7 Electronic module (set)
7.1
7.3
7.4
7.5
8.2 Ventilation valve
Tab. 11: Spare part components
English
Details
Impeller
Retaining ring
O-ring
Retaining ring
O-ring
Mechanical seal
Spacer
O-ring
Pump housing
Screw plug
(in version ...-R1)
Valve (for double pump)
Electronic module
Module cover
Screws
Tooth lock washers
111