Manually Lighting The Grill; Check The Flame - Pit Boss TG2SS Instructions Et Utilisation

MANUALLY LIGHTING THE GRILL

1. Open the Hood. IMPORTANT: Make sure regulator knob is turned "Off".
2. While holding a lit match near the burner (Fig. 4), push the regulator knob in
and turn 270 degrees (or 3/4 turn) counterclockwise to the High position (Fig. 2).
If burner goes out during operation, turn regulator knob to the "Off" position.
Open hood and wait five minutes before attempting to relight the grill to allow any
accumulated gas to dissipate.

CHECK THE FLAME

WARNING: To reduce the risk of serious bodily injury or death from fire or explosion
or a fire:
• Regularly inspect and clean Burner/Venturi Tube for insects or insect nests,
especially after periods of storage. Spiders or small insects can build nests,
webs, and lay eggs in th grill's Venturi Tube, obstructing the flow of gas to the
burner (Fig. 6). The backed-up gas can ignite and cause a fire. This is known as
a "flashback".
• Be sure Burner is re-installed properly before using grill.
The burner has been preset by the manufacturer for optimal flame performance. A
blue flame, possibly with a small yellow tip, is the result of the optimal air and gas
mixture (Fig. 5).
15
All manuals and user guides at all-guides.com