Connecting Lp Gas Cylinder; Disconnecting Lp Gas Cylinder - Pit Boss TG2SS Instructions Et Utilisation

CONNECTING LP GAS CYLINDER

1. Purchase 1lb. LP Gas Cylinder at your local retailer.
2. Turn the regulator knob to the "Off" position.
3. Remove protective cap from regulator opening. Remove plastic cap from top of
propane cylinder. Save cylinder cap for replacement on cylinder if gas remains
in cylinder after use.
4. Insert the 1 lb. LP Gas Cylinder into the threaded hole in the underside of the
regulator. Turn the cylinder clockwise until firmly seated. Hand tighten only.
(Fig. 1)
5. For optimum performance, allow cylinder to hang vertically off the edge of the
table when there is no danger of being bumped or disturbed.
NOTE: NEVER FOLD UP OR TRANSPORT GRILL WITH CYLINDER ATTACHED.

DISCONNECTING LP GAS CYLINDER

1. Turn regulator knob to the "Off" position.
2. Remove the cylinder by turning counterclockwise.
3. Replace the protective cap over the regulator opening. Replace the plastic cap
on the top on the top of propane cylinder for storage if not empty.
4. Store cylinder outdoors and away from grill.
All manuals and user guides at all-guides.com
10