Lighting The Grill; Lighting Grill Using The Pulse-Spark Ignitor - Pit Boss TG2SS Instructions Et Utilisation

• If the leak is coming from the Gas Cylinder or if the leak cannot be stopped,
remove the cylinder and DO NOT USE THE GRILL. Call Customer Service at 1-877-
303-3134. Be sure to have the grill model number and serial number printed on
the label, located on the inside of the rear leg. If you need a replacement part
under warranty, a proof of purchase will be necessary.
WARNING: To reduce the risk of serious bodily injury or death from fire or explosion:
• Open Hood before lighting the grill to release trapped gas.
• During failed lighting attempts, or if the burner goes out during operation, turn
Control Knob "Off" to dissipate any accumulated gas. Wait five minutes before
repeating lighting procedure.

LIGHTING GRILL USING THE PULSE-SPARK IGNITOR

1. Open the Hood.
2. Push the Regulator Knob in and turn 270 degrees (or 3/4) counterclockwise
to the High position (Fig. 2). Note the triangular indicator mark on the silver
13
All manuals and user guides at all-guides.com

LIGHTING THE GRILL