Pit Boss TG2SS Instructions Et Utilisation page 25

Burners will not light
using a match.
Low Flame or low
Heat.
Flames Blow Out
Flare Up
Persistent Grease Fire
If your problem is not resolved from the information provided above, please
call Customer Service at 1-877-303-3134. If you need a replacement part under
warranty, a proof of purchase will be necessary.
All manuals and user guides at all-guides.com
Burners not
assembled correctly.
LP Gas Cylinder is
empty.
LP Cylinder is not
fully attached to
regulator.
Obstructions in
Burners.
LP-gas in LP Gas
Cylinder is low.
High or gusting
winds.
Gas in LP cylinder
is low.
Grease Build-Up
Excessive fat in
meat.
Grease trapped
around burner
system.
See re-assembly after cleaning in
Care and Maintenance.
Purchase a new 1 lb. LP Gas
Cylinder.
Tighten cylinder by hand. Do not
use tools.
See "How to Clean Burners" in
Care and Maintenance.
Purchase new 1 lb. LP Gas Cylinder.
Turn front of grill away from wind
or increase flame height.
Purchase new 1 lb. LP Gas Cylinder.
Clean grill.
Trim fat from meat before grilling.
Turn Regulator Knob "Off" then
remove the LP Gas Cylinder. Open
hood carefully and let fire burn
out. After the grill cools, remove
and clean all parts.
24