Table Des Matières - Pentair PVM 1 Instructions

SUMMARY
CHAPTER DESCRIPTION
1 SAFETY INSTRUCTIONS
2 IDENTIFICATION CODE AND NAMEPLATE FORMAT
3 APPLICATIONS
4 TECHNICAL DATA
5 HANDLING AND STORAGE
6 INSTALLATION
7 ELECTRICAL CONNECTION
8 START-UP
9 MAINTENANCE
10 TROUBLESHOOTING
- WARRANTY
CHAPTER 1
SAFETY INSTRUCTIONS
You have purchased a product with excellent quality and service. Secure this service by carrying out the installation works in
accordance with the instructions, so that our product can perform its task to your complete satisfaction. Any damage caused by
inappropriate use invalidates the guarantee. This manual is an integral part of the product and must be consulted before first use and to
ensure correct use and maintenance.
Therefore please adhere to the instructions in this manual!
This instruction manual contains essential information that must be observed during installation, operation and servicing. It is
therefore important that the installer and the responsible technician/operator read this instruction manual before the equipment is
installed and put into operation. The manual must always be available at the location where the pump or the system is installed.
Failure to observe the safety instructions can lead to the loss of all warranty.
In this instruction manual, safety information is distinctly labelled with particular symbols. Disregarding this information can be
dangerous.
DANGER
General danger to people.
DANGER - ELECTRIC SHOCK RISK
Warning of electrical voltage
ATTENTION
Danger to equipment and operation.
1.1 QUALIFICATION AND TRAINING OF PERSONNEL
All personnel involved with the operation, servicing, inspection and installation of the equipment must be suitably qualified for this
work and must have studied the instruction manual in depth to ensure that they are sufficiently conversant with its contents. The
supervision, competence and areas of responsibility of the personnel must be precisely regulated by the operator. If the personnel do
not have the necessary skills, they must be instructed and trained accordingly.
1.2 SAFETY-CONSCIOUS WORKING
The safety instructions in this instruction manual, the existing national regulations regarding accident prevention, and any internal
working, operating and safety regulations must be adhered to.
1.3 SAFETY INSTRUCTIONS FOR THE OPERATOR/USER
All legal regulations, local directives and safety regulations must be adhered to.
The possibility of danger due to electrical energy must be prevented.
Legal regulations must be observed.
EN
ORIGINAL INSTRUCTION
PAGE
1
3
4
4
6
7
10
11
12
13
137
1