Table des Matières
Publicité
Operation of the gasoline engine
Definitely make sure to read the gasoline engine operating manual which contains all information relating to
operation, service and maintenance of the engine.
Operation of the electric motor
Plug the power connector into a grounded power outlet equipped with a fault current protection switch. Turn the
motor on with by switching the main switch.
Adjusting the spraying pressure
Once the engine is running and you are about to start work, the desired spraying pressure must be adjusted. First
wait until all the air has been discharged out of the pump system. Then bring the clip of the safety relief valve into
the desired position (steps 1 - 4) and operate the compression lever such that the spraying pressure takes effect.
Check the adjusted value on the pressure gauge. Finally, open the ball valve to start working.
Use of the pulsation damper
The pulsation damper has to be filled or preloaded through the compressed air valve with approx. 8 bar twice
a year.
Safety valve
Released safety valve at step 1
Max. pressure at step 4
Compression lever
Clip
Pulsation damper
Steps 1 – 4
Compressed air valve
Ball valve
Pressure gauge
8
Publicité
Table des Matières
