Help Menu; Enter A Simulated Speed (For A Defective Distance Sensor) - Amazone AMATRON+ Notice D'utilisation

5.2

Help menu

The Help menu is accessed via the Main menu.
Page 1 of the Help menu
•
Operation.
Fault messages.
•
5.3

Enter a simulated speed (for a defective distance sensor)

Entering a simulated speed allows
the worked area to be calculated if
the distance sensor is defective.
As soon as the AMATRON
starts receiving pulses from the
distance sensor again, these will be
used to calculate the operational
speed/area.
1. Disconnect the signal cable from the tractor
basic equipment.
2. Enter the desired simulated speed.
3. Confirm entry.
→
The speed symbol
the Work menu.
During operation, this speed must
be precisely maintained.
Amatron+ BAG0055.0 08.07
.
Fig. 41
+
is shown inverted in
Fig. 42
Fault
31