Installation - Amazone AMATRON+ Notice D'utilisation

1

Installation

Fig. 22
Amatron+ BAG0055.0 08.07
•
Tractor basic equipment (Fig. 1/1):
The tractor basic equipment (console with distributor) must be
installed to the right of the driver in the cab, within visual range and
easy reach, so that it is vibration-free and electrically conductive. The
distance from the radio unit or aerial must be at least 1 m.
Care should be taken to ensure that the computer housing has a
conductive connection to the tractor chassis via the console. For the
installation, the paint must be removed from the installation points in
order to prevent the build-up of an electrostatic charge.
+
•
AMATRON
The computer mount is fitted on to the console pipe line.
•
Machine computer (Fig. 1/3):
Fit the machine computer to the machine in the most protected area.
•
Wheel sensor (Fig. 1/4 or 5)
Depending on the model variant, connect the wheel sensor either to
the tractor basic equipment or to the machine computer. Alternatively
use a signal cable.
•
Signal cable for tractor signal socket (Fig. 1/6):
Connect the signal cable for the tractor signal socket to the tractor
basic equipment.
•
Working position sensor (Fig. 1/7):
Fit the working position sensor to the machine in such a way that it is
energised when the machine is not in the working position.
Connect the working position sensor to the machine computer.
•
Battery connection (Fig. 1/8):
The required operating voltage is 12 V, which must be drawn directly
from the battery or from the 12-volt starter motor.
ο
Brown cable core to the + terminal
ο
Blue cable core to the - terminal
Before connecting the AMATRON
batteries, it must be clarified, by referring to the tractor operating
instructions or by asking the tractor manufacturer, which battery the
computer must be connected to.
operating terminal (Fig. 1/2):
+
to a tractor with several
Installation
19