Amazone AMATRON+ Notice D'utilisation page 28

Commissioning
4.4.1.1 Entering pulses per 100 m manually
1. Enter pulses per 100 m.
2. Confirm entry.
4.4.1.2 Establishing pulses per 100 m by way of a calibration run
1. On the field, measure out a calibration
distance of exactly 100 m.
2. Mark the start and end point (Fig. 13).
3. Start the calibration run.
4. Drive the exact calibration distance from the
start to the end point.
→
The pulses are continuously detected and
shown on the display.
5. Stop precisely at the end point.
6. End calibration procedure.
→
The AMATRON
pulses detected and automatically
calculates the "Pulses per 100 m"
calibration value.
28
+
accepts the number of
Fig. 34
Fig. 35
Amatron+ BAG0055.0 08.07