Publicité
Les langues disponibles
Les langues disponibles
4
VEHICLE PREPARATION
1. Using a 12mm socket/ratchet, disconnect the negative battery terminal. (FIGURE A)
NOTE: Do not disconnect the battery cable from the battery post.
2. Starting at the bottom, use a panel removal tool to carefully remove the left side dashboard panel (FIGURE B). Remove
one (1) Phillips screw securing the lower dashboard panel on the left side of the dashboard. (FIGURE C)
3. Remove the driver's side under dashboard fi nisher panel by depressing the three (3) pressure clips and pulling
downwards. Disconnect any connectors that may be attached to it. (FIGURE D)
FIGURE A
FIGURE C
PART NUMBER
ISSUE
H001SAL000
DATE
00
4 April 2014
FIGURE B
FIGURE D
SUBARU OF AMERICA
2 OF 17
Publicité
