Subaru H001SAL000 Manuel D'installation page 15

11
UNDER HOOD WARNING LABEL MOUNTING
1. Using alcohol, clean the top of the air intake plenum,
near the radiator core support.
2. Remove the adhesive backing of the underhood
warning label and secure to the top of the air intake
plenum, as shown. (FIGURE LL)
12
PANEL RE-ASSEMBLY
1. Re-install the steering column shroud and secure in place with two (2) Phillips screws.
2. Re-install the metal knee bolster and torque the two (2) 10mm bolts to 7.5 Nm +/- 1.8 Nm (0.75 Kgf-m +/- 0.2 Kgf-m,
5.5 ft-lbs +/- 1.0 ft-lbs).
3. Plug in any previously removed connectors and re-install the lower dashboard panel.
4. Re-install the under dashboard fi nisher panel
5. Re-install the one (1) Phillips screw on the left side of the dashboard that secures the lower dashboard panel in place.
6. Re-install the left side dashboard panel. (refer to FIGURE B)
7. At the end of the installation, insert the Quick Reference Cards into the Owner's Information Kit.
PART NUMBER ISSUE
H001SAL000
DATE
4 April 2014
00
SUBARU OF AMERICA
FIGURE LL
15 OF 17